Tis’ the Season… An EASY Photo DIY Project

Though there are tons of great art collections to put on your wall, sometimes it can be difficult finding the perfect piece that speaks to you; especially for the price you are willing to pay. Sometimes it can pose a challenge. However, often times it allows for a great opportunity to get creative!!! 😊 Most times, for me that means a perfect time to add a personal piece to make the space super special. If you have an open wall area, whether large or small that needs that customized piece, I have the perfect simple project for you. All you need is a camera/phone, your eyeball and some time. I call it a Season Collage.

Here’s what you do:

First you go outside and identify an object/landmark of some sort. It can be a tree, a mountain, pond, garden, even your front porch. Whatever it is, it is best if it is meaningful to you in some way. Perhaps the place of your proposal, your grandmother’s old shed, a tree you planted when you first moved into your home, or even a rock that sits in your driveway.

Next, you take a picture of that object in the same frame, the same spot, the same direction during the Summer, then again in the Fall, Winter and Spring.

Then, you simply take them to a photo center of your choice and print them out. You can be SO creative with these pictures by playing with size, shape, filter, frame etc.

For my own Seasonal Collage, I used the mountain that sits in our backyard. I was inspired to make this project by witnessing the variety of beauty the mountain portrays. It is almost like looking at a new portrait every day and certainly every season. Over the course of us living here, I have taken several pictures of it and eventually printed my favorite four to depict the seasons.

 

 

They currently hang on canvas as a staple eye catcher in our guest bathroom. I even added a metal tag to label each picture. Whatever your landscape, there is surely a point of meaningful beauty you can capture and frame to create the perfect Season Collage for you and your guests to enjoy all year long!

20180301_142354~3.jpg

DIY #9: HOW WE MADE OUR OWN WALKWAY…

Well here we go! If you’ve been following my blog, (which you SHOULD of course!!! 🙂 ) you know that my family and I had a home built in the North Georgia mountains about 2 years ago. We had an awesome builder, however, he did not include a walkway that led from our driveway to the front door. For a while that had been fine, however, after a very rainy season, and the grass not quite growing in yet, the water began to wash the dirt from the mountain onto our “rock” walkway. Of course, this meant that my kids, my dog and everyone else that came over were dragging mud or dirt ALL over the house!!! Uuuggghhh!!! We immediately contacted our builder who gave us a price ($3000-$3500) to complete the task. Though this seemed to be a bit steep, we set up a budget, a date and were excited to get underway.  Unfortunately, we waited, and waited and waited to no avail. DOUBLE UUUGGGGHHH!!!! Sooooo, I sat with a couple girlfriends one afternoon, and during our “girl talk” (if you could ever imagine) we discussed the idea and the “ease” of using pavers to create a beautiful walkway. “THAT’S IT!!!!!” I thought!!! I could go to Home Depot and price out some super pavers and as always… DO IT MYSELF!!!!

Though Home Depot offered an amazing variety of paver options, I counted up the cost, and it was waaaaaaaay too high. So, after searching on Amazon, I found the Quikrete Brick Walk Maker!!! It was PERFECT!!! Now this was something I could do! Use the molding to create a pathway!!! I ordered the mold for $24.99 and while waiting the couple days it took to get here, I looked on YouTube and studied the materials I needed and created a configuration that would work best for us. Simple right????? UUUMMMM…. NOT QUITE!!! Considering the area we had to cover, this was quite an adventure, and after 3 months, our walkway is finally complete. While we are certainly LOVING the results, I decided to put this blog together to help guide you through our personal process to help avoid the bumps along the way. Here are the 3 steps we took:

  1. The first step was to use the mold to create the bricks. We used a 60lb bag of quikrete. I bought an $8 mixing tub for mixing and an $8 trowel to level the mix and of course kept my hose very close to make the necessary consistency. It would seem you should over fill the mold with mix in order to create a thick/strong brick. That is not true. Fill the mold, but don’t over-stuff it. This will make the top of the brick uneven. Some people rent a concrete mixer for this part. Though that would come in SUPER handy, we did it the old-fashioned way, with a shovel. Let each mixture set for 5-10 minutes and carefully remove the mold. We proceeded to mix the next bag of concrete while the current one was setting. That helped keep the pace going smoothly. Repeat this process for each brick. Be sure to line the mold next to the prior brick in order to accomplish a patterned walk. Don’t be afraid to add curves as long as the distance isn’t too far from the adjoining brick.

2.  Once you have designed your configured path or patio, you can prepare to prime and stain your bricks. I love this part of the project, because there is a super selection of colors and shades you can select from. Go to the paint/stain section of your local Home Depot to choose the color that works best for your space. Many people add dye to the bricks while mixing the concrete. I like staining afterwards because it is MUCH more cost effective and gives you a greater selection. The prime and stain manufacturers advise you to wait 30 days until your concrete has cured before starting this process. We didn’t quite wait the full 30 days, but perhaps at least 15 worked for us. We primed first and stained it a charcoal color one day later. The prime goes on easy. I used a paint brush, but you can use a roller as well. You really can’t mess this part up, so enjoy this opportunity to be creative.

3.  Finally, once the stain is the shade/tint you like, you can add the SAKRETE PermaSand for a “grout” effect. We found this item at Home Depot as well, however, it was quite costly at $20 per container. Because we had so many bricks to fill, I could have easily used 8-10 of these. However, I decided to buy Quikrete sand topping mix for the bottom portion as a filler. I poured the sand in the grooves of the bricks to about half way. And THEN added the Permasand as a sealer on the top portion. I then swept it into the cracks. The directions will tell you to use a leaf blower to remove all excess sand from the surface. We did that and lightly watered the sand and watched it harden. This was a great part of the process because you can see the contrast of the grout and the color of the bricks. It is a great signal that the project is almost complete.

Once the grout has dried, you can enjoy your paver patio/walkway etc… Contrary to my initial plan, this is not an overnight project. It is indeed labor intensive, but I admit that most of the job was done by me and my 14 year old daughter in 90 degree temperatures. If we can do it, surely you can. The key is making sure you take your time. Do not rush this process. Loading the quikrete concrete itself has to be done in stages (depending what car/truck you have) because you don’t want to ruin your struts. Mixing that mix is tough and doing too much in one day, can put undo strain on your back. TAKE IT SLOW. When done well, it will be a super cool project you can enjoy and reflect on for years to come!!!!

DIY #8 THE GREAT WALL OF WISDOM…

Two things I have in every room in my house, a clock and a sign. 🙂 I LOVE SIGNS… and all things positive. I remember when I used to teach high school, I would cover my bulletin boards with hundreds of inspirational quotes from various influential figures to help bring love and encouragement to the classroom. It would only be fitting to create this same energy in my own home. So, for the past several months, I have shopped various stores, antique shops, boutiques, and Etsy, to collect signs of scriptures, quotes, thoughts of wisdom or simple words to reflect some of my favorite ideas. Last week, my husband helped to hang my last sign and my word wall is finally complete.

Here are pics of our completed project. Though it may take a little time, it is actually quite easy to do. Start by purchasing the signs that reflect your sentiments. You will find them at Hobby Lobby, TJ Maxx, Ross, Altrd’ State, Etsy, Marshalls, Kirkland’s, and the like. Pace yourself with the purchasing… signs can get costly. In a puzzle like manner, hang each sign in random design according to the fit of the one to follow. Continue with this process until you reach capacity. Feel free to add framed pictures, initials, clocks or whatever brings meaning to your collage. Whatever the case, there is no way to do it wrong. It is a great way to share your heart with all who dwell in or visit your home. Have fun. Spread the wisdom, inspiration and love… Lord knows we could all use it.

wp-1488917610349.jpeg

When I taught high school, I used to fill my bulletin board with awesome quotes… some things never change…

wp-1488917651931.jpeg

A collection of scriptures, quotes, thoughts of wisdom, or simple words from various stores, antique shops, Etsy and others to reflect some of our favorite ideas.

wp-1488917744866.jpeg

So grateful to my husband for helping me hang all of my tedious wall projects!!!!

wp-1488917778278.jpeg

one sign at a time…

DIY #6: The Christmas Tub: An Alternative to the Expensive Tree Skirt…

If you are like me, you have scoured the various fabulous home stores in search of the perfect tree skirt… only to be disappointed by the hefty price tag. $59.99 (or more) is JUST NOT HAPPENING SISTER!!!! I TOTALLY get it!!! That’s like five additional gifts I could put under the tree…. HELLO!!!! Well if this is you, fear not. I have a great alternative and cure for your “Tree Skirt Blues!!!” A super simple DIY project for the whole family to bring a little extra “joy” to your experience.  It is made with a galvanized tub and is especially perfect for the freshly cut trees that will need regular watering.

The first step is purchasing your tub. You can find these at most home improvement/hardware stores, including Home Depot, Ace Hardware and Tractor Supply Co. Look for the Behrens 16” galvanized steel tub. They are usually no more than $20.34ab6ec8-71ac-4728-855d-bdd6e20aa3df_1.aec77a83eb19ed2541aabc65a91d7beb.jpeg Next, you can select a paint color that matches your décor. I would recommend chalk paint as it will adhere to the metal surface best. I find white to be a great neutral color so that it can serve as the base for any decorating you may want to do thereafter. If you put a tarp down, and grab several paint brushes, this could be a great part for the kids to join in and help.

 Once the paint dries, you can use hot glue to add any accessories to match your décor. I love burlap, so in this picture, I wrapped the center of the tub with burlap and then added metal lettering. However, you can add glitter; surround your tub with pictures, letters, ornaments or whatever creative idea works for you and your family. 

wp-1479487858368.jpeg

Once your masterpiece is complete, you can carefully place your tree (and stand) inside your bucket and enjoy worry-free watering. Just another way to customize your holiday experience and make it meaningful for the entire family… You can even make changes to it and use it year after year….thus enjoying YOUR journey!!! If you decide to make the Christmas tub, be sure to stop back by and post pics of your creation. Until then, Merry Christmas to you and yours!!!

wp-1480967661224.jpeg